Rim Panic Device

1. Prepare the Door: Ensure the door is in good condition and free of any obstructions. Measure and mark the locations for the device, making sure it’s centered and aligned properly.

2.Drill Holes: Drill holes according to the manufacturer’s instructions for mounting the exit device. These holes are typically for the mounting screws and possibly for the cylinder if it’s included.

3.Install Device: Attach the rim exit device to the door using the provided screws. Make sure it is securely fastened and level.

4.Mount Strike Plate: Install the strike plate on the door frame or adjacent surface, ensuring it aligns properly with the exit device latch.

5.Connect Trim: If your exit device includes a trim, such as a lever or knob, attach it according to the manufacturer’s instructions. This may involve connecting rods or cables to the exit device mechanism.

6.Test Operation: Test the operation of the exit device to ensure it opens and closes smoothly. Check that the latch engages properly with the strike plate.

7.Adjustments: Make any necessary adjustments to the device or strike plate to ensure proper operation. This may include adjusting the position of the device or strike plate, or adjusting the tension on the mechanism.

8.Final Checks: Once everything is installed and adjusted correctly, double-check all screws and connections to ensure they are tight and secure.

9.Test Again: Test the exit device once more to ensure it operates correctly and securely locks the door.

10.Complete Installation: Once satisfied with the installation, complete any additional steps recommended by the manufacturer and clean up any debris from the installation process.